Home >
Diving system spare parts United Kingdom
Principle:
These modular elements include the main components of a gas panel: filters, regulators, dump valve, safety valves, non-return valves, valves, solenoid valves ... also input and output blocks, connection blocks that can receive pressure gauge, purge valves ...
The assembly of the...
More
• Brass body• Working pressure: 250 bar• Seat: PCTFE or copper for O2• Cleanliness: O2 cleaned
More
• Brass body• Working pressure: 250 bar• Seat: PCTFE• Cleanliness: O2 cleaned
More
• Brass body• Back-up pressure: 250 bar• Outlet pressure: 7 to 52 bar• Seat: brass and PCTFE• Cleanliness: O2 use
More
The F1526 Filter is used exclusively in INTEGRABLOC circuits in order to protect the downstream equipment against dirt and foreign particles.
It is mainly used assembled with the D104 regulator.
The filter cartridge can be replaced without removing the filter from the line.
Maximum pressure:...
More
• Brass body• Back-up pressure: 250 bar• Outlet pressure: 7 to 52 bar• Threaded hole: 3/8’’ BSP• Seat: brass and PCTFE• Cleanliness: O2 use
More
The F1509L filter is used in order to protect the downstream equipment against dirt and foreign particles.
It is easily assembled with D79/L and D110 Pressure Reducers thanks to a special Adjustable fitting.Note : F1509/L14 is sometimes seen in old COMEX part lists for the F1509L dedicated to...
More
The D106 Pressure Reducer is specially designed for DDC analysis line.
• Brass body
• Back-up pressure: 250 bar
• Oulet pressure: 0.1 to 1.5 bar
• Seat: PCTFE
• Inlet/outlet: 1/4” BSP
• Cleanliness: O2 use
More
The D107 Pressure Reducer is specially designed for Bell analysis line.
• Watertight
• Brass body
• Back-up pressure: 250 bar
• Oulet pressure: 0.1 to 1.5 bar
• Seat: PCTFE
• Inlet/outlet: 1/4” BSP
• Cleanliness: O2 use
More
D108 Pressure Regulator works like the D106 Pressure Regulator, but the diaphragm is replaced by a piston to allow outlet pressure up to 50 bar• Brass body• Back-up pressure: 250 bar• Outlet pressure: 2 to 50 bar• Seat: PCTFE• Inlet/outlet: 1/4” BSP•...
More
The D110 Pressure Reducer is specially designed for Bell O2 add.
• Watertight
• Brass body
• Back-up pressure: 250 bar
• Outlet pressure: 2 to 5 bar
• Seat: PCTFE
• Inlet/outlet: 1/4” BSP
• Cleanliness: O2 use
More
The Shuttle valve is designed to supply the breathing mixture to the divers in normal and emergency case.In Normal use, the user outlet is supplied by the umbilical.In case of accidental cut off of the supply coming from the surface, the shuttle valve swings automatically in safety position: the...
More