Our services
This unit enables to inhale a breathing mixture which is different from the one constituting the ambient atmosphere.
It has been specially designed to breathe oxygen-rich mixtures used in hyperbaric oxygen therapy or by divers during chamber...
More details
This Oronasal breathing Mask is dedicated to the Wall-mounted Demand Regulator BIBS system.It may also be used with the Free Flow Breathing system when the Oxygen supply is connected to the O2 bag instead of the Mask.This mask is much...
More details
This BIBS system is the same as the usual BIBS systems, except the Demand Regulator is not fitted onto the mask but wall-mounted.The mask is much lighter and comfortable than the usual BIBS mask.Built-in Breathing System enables divers or patients...
More details
The Free-flow breathing System enables divers or patients to inhale a breathing mixture which is different from the one constituting the ambient atmosphere of the hyperbaric chamber.
It has been specially designed to breath oxygen-rich mixtures...
More details
Built-in Breathing System enables divers or patients to inhale a breathing mixture which is different from the one constituting the ambient atmosphere of the hyperbaric chamber.
It has been specially designed to breath oxygen-rich mixtures used...
More details
Jupiter underwater connectors are used by COMANEX because of their robustness and tightness performances regarding gas mixtures including Helium. For connecting to chambers or bells, Round Jupiter Receptacles are screwed into our 3-piece elbows...
More details
The new technology Fluorescence O2 Analyser is a touch screen instrument, for use in the commercial diving and medical hyperbaric industries.The analyser is conformant with EU EMC directives and certified for use in heavy industrial...
More details
The new range CO2 Analyser is a touch screen instrument, for use in the commercial diving and medical hyperbaric industries.The analyser is conformant with EU EMC directives and certified for use in heavy industrial environments.The analyser is 3U...
More details
The new range Galvanic O2 Analyser is a touch screen instrument, for use in the commercial diving and medical hyperbaric industries.The analyser is conformant with EU EMC directives and certified for use in heavy industrial environments.The...
More details
The new range Paramagnetic O2 Analyser is a touch screen instrument, for use in the commercial diving and medical hyperbaric industries.The analyser is conformant with EU EMC directives and certified for use in heavy industrial environments.The...
More details
• Plain copper core, class 5, IEC 60228• Cross-linked halogen free polyolefin• Nominal voltage: 600/1000 V• Test voltage : 3500 V• Working temperature: - 30°C to + 125°C• Max. temperature of the core: +...
More details
The CO analyser is a panel mounted unit, complete with display, sensor, on/off and mute push buttons.The display has high and low set points with audio visual alarm and mute circuit.Day to day calibration is carried out from the front panel. All...
More details
The old generation CO2 Analyser is no longer available.Please refer to the NEW RANGE Touch Screen Analyser.
More details
The old generation Paramagnetic O2 Analyser is no longer available.Please refer to the NEW RANGE Touch Screen Analyser.
More details
This hydraulically operated device allows cutting of umbilicals of diameter up to 120mm and GL cables. The system is approved by DNV & LRS. The cutter features one safety device preventing any movement of the blade in case of leakage of the...
More details
COMANEX standard Umbilical features hoses for pressurisation, decompression, gas reclaim, pneumolines, hot water and cables for power supply, communications & video.
More details
COMEX standard releasable sockets are designed and approved for lifting wire ropes from Ø 22 mm to Ø 42 mm. Other designs are available upon request.The socket eye is hold directly by the ram rod. Removing the rod releases the...
More details
COMEX standard releasable sockets are designed and approved for lifting cables from diameter 22mm to 42 mm.
It is operated from inside the diving bell using a spanner or a dedicated wheel.
The standard socket features a hooking piece (A) with an...
More details
The cable penetrator is designed to allow the penetration of electrical cable inside a pressure vessel through a 1’’ NPT thread.For diving bells, the underwater connector is fitted outside.For decompression chambers, the underwater...
More details
In this design, the chamber/bell flange directly holds the acrylic window. Designed for both internal and external pressure.Especially designed for diving bells also used as observation bells. Certified according to ASME PVHO-1. The complete...
More details
Designed to be fitted in COMEX standard diameter 220 mm flanges. Certified according to ASME PVHO-1. The complete assembly is made of: • Acrylic flat disc window with O-ring and hard bearing gaskets (2 off) • Window support with O-ring...
More details
We manufacture Multi-way penetrators and Mushrum type penetrators for Chamber or Diving Bell.The number of ways and design are according to customer specification.Example: 6-way penetrator for Chamber4-way penetrator for Diving Bell
More details
The Trunk penetrator is specially designed not to restrict the way inside the trunk.
The progress of the divers through the trunk is smooth and easy.
More details
Bronze bushing prevents the fluid from being in contact with the plate.
• To be used on penetrator plate only
• Remove the damaged threading by drilling at penetrator nominal diameter
• Place and tighten the...
More details
The Bell penetrator is made of one carbon steel penetrator to be welded on the diving bell hull.
Then the bronze bushing can be screwed into the penetrator.
The bushing features 1/4"NPT, 1/2"NPT or 1"NPT hole each side to connect skin...
More details