In this design, the chamber/bell flange directly holds the acrylic window. Designed for both internal and external pressure.Especially designed for diving bells also used as observation bells. Certified according to ASME PVHO-1. The complete...
More details
We manufacture Multi-way penetrators and Mushrum type penetrators for Chamber or Diving Bell.The number of ways and design are according to customer specification.Example: 6-way penetrator for Chamber4-way penetrator for Diving Bell
More details
The system is made to maintain bell and chamber doors closed.• No ‘‘hot work’’ requested for installation• The U part is screwed on the chamber mating face• The pin is screwed on the doorAs to meet the last...
More details
To prevent the interconnection of the chamber with the waste water circuitry, the interlock is composed of two systems:
• One system inside the chamber which prevents utilization of the toilet until the exhaust valve is closed....
More details
We design and manufacture Mating Clamps for Bell/Chamber Trunks and Equipment Locks up to 45 bar. Clamps may be manually operated or assisted. Every clamps may be fitted with its dedicated Interlock Device to put the system in compliance with the...
More details
The Comanex paints are suitable for painting of internal / external of Diving Bells and Chambers.
These paints have been developped for the hyperbaric use.
Various paints are available for application on sand-blasted surfaces as per COMANEX...
More details