Home >

Manufacture of diving system and chamber accessories France

Multi-way Penetrators
We manufacture Multi-way penetrators and Mushrum type penetrators for Chamber or Diving Bell.The number of ways and design are according to customer specification.Example: 6-way penetrator for Chamber4-way penetrator for Diving Bell
More
Chamber Penetrator Bushings for damaged threads
Bronze bushing prevents the fluid from being in contact with the plate. • To be used on penetrator plate only • Remove the damaged threading by drilling at penetrator nominal diameter • Place and tighten the bushing 2.5.0.0 2.5.0.0
More
Trunk Penetrators
The Trunk penetrator is specially designed not to restrict the way inside the trunk. The progress of the divers through the trunk is smooth and easy.
More
Dogs for Autoclave Doors
The system is made to maintain bell and chamber doors closed.• No ‘‘hot work’’ requested for installation• The U part is screwed on the chamber mating face• The pin is screwed on the doorAs to meet the last rules and recommendations in force, the sytems...
More
DIV 38 Alarm
COMEX diving bells feature a DIV 38 shuttle valve fitted on the breathing panel.In case of lack of breathing gas coming from the umbilical, the shuttle valve automatically by-passes the umbilical and puts in use the gas coming from the onboard gas bottles. To advise the divers that the breathing...
More
Pressure Vessel Internal Lighting
This system designed by COMEX INDUSTRIES wears a DNV approval provided that the bulbs and the bulb holders are of a specific type.
More
Bell / Chamber Hangable Light
• Suitable for: - DDC Bunk box featuring two 24 V bulbs: - 4 W for main light - 2.5 W for secondary light - SDC emergency light featuring 12 V / 4 W bulbs and power supplied by the emergency battery pack • Water and impact resistant case • Three-position switch:- Off - Main...
More
Paints for Chambers and Bells
The Comanex paints are suitable for painting of internal / external of Diving Bells and Chambers. These paints have been developped for the hyperbaric use. Various paints are available for application on sand-blasted surfaces as per COMANEX specification 1220 1497 available on request: Epoxy...
More
Diving Bell Insulation
Insulation and buoyancy of the diving bell is made by tiling the hull with HPC blocks. The mechanical resistance and the sealing of the HPC blocks are obtained by coating one fibreglass skin overall the blocks. The HPC blocks are rigid micro-cellular closed cells plastic foam. The chemical...
More
Handling Systems
COMANEX designs and manufactures all types of Launch & Recovery Systems for Saturation, Bounce and Air diving. According to customer specifications and support vessel configuration, either Tilting A-Frames, Translating Trolleys or Moon-Pool launching may be chosen. COMANEX has a long...
More
Launch And Recovery Systems - LARS
COMANEX designs, manufactures and provides maintenance for diving handling systems: • Tilting A-frames • SDC and open bells • Translation Trolleys • Single or twin baskets Conceptions and realisations are in compliance with last rules and recommendations in force. For...
More
Hydraulic Power Pack - HPP
We designs and manufactures Hydraulic Power Packs for all types of diving systems. We also up-grades and repairs existing HPP. We already designed and manufactured: • Bell handing system HPP • Saturation Diving Twin Bell system HPP • Air Diving HPP • Stainless Steel Air...
More