Home >
Manufacture of diving equipment United Kingdom
Unit Price EXW excl. VAT : 1415.00 EUR
_____________ _____________ _____________
The second stage enables the LB78 dump valve to be utilized down to 450 msw. The action of the second stage limits the differential pressure through the LB 78 dump valve at 1 to 4 bar. A double valve system enables the exhaust...
More
Oxygen concentration is displayed, through the hyperbaric sensor, on the controller. The required oxygen level is set from the front panel.If the oxygen concentration detected by the sensor is below the control set point value, the controller will operate the O2 make-up solenoïd valve.After...
More
The DDC Heater is designed to provide a continuous flow of hot water to the decompression chamber exchangers.
The purpose of the DDC Heater is to:
- Heat the water during start-up.
- Maintain water temperature during operations.
- Supply the chamber exchangers in a closed...
More
Unit Price EXW excl. VAT : 554.00 EUR
_____________ _____________ _____________
Lung powered scrubber which ensures the scrubbing of the CO2 contained in the gases breathed by personnel in a confined environment in the event of breakdown in the normal ventilation or regeneration system...
More
The CO analyser is a panel mounted unit, complete with display, sensor, on/off and mute push buttons.The display has high and low set points with audio visual alarm and mute circuit.Day to day calibration is carried out from the front panel. All the calibration and alarm parameters are retained...
More
This compact stainless steel unit is specially designed for HRL.
Principle:
The heating or cooling water produced by either the chilled water unit or the electric boiler is sent to the chamber exchanger through the pump according to the setting of the regulation unit.
Featuring:
• One...
More
Le Système de respiration intégré (BIBS = Built-in Breathing System en anglais) permet de faire respirer aux patients installés dans une chambre hyperbare un gaz différent de celui de l'atmosphère.
Il s'agit généralement d'un...
More
This diver held TV camera enables the surface to control at any time the dive as it is seen by the diver and to:- give technical instructions and assistance to the diver for more efficient work,- improve communication between diver and surface as well as diver's safety,- save the use of more...
More
The temperature and relative humidity into each chamber are automatically controlled from the saturation control room. The regulation rack uses the signals given by the sensors to adjust the flow of regulation valves.The blowing temperature is regulated to insure a maximum comfort.The alarms are...
More
The hyperbaric foam fire extinguisher is an effective means of fighting fires at their outbreak in hyperbaric chambers without contaminating the atmosphere.Injection gas chosen by the user in order not to contaminate the chamber’s atmosphereA NEW HYPERBARIC FIRE EXTINGUISHER IS UNDER STUDY...
More
This unit is a 2-channel simplex diver communication set. It is designed to operate with a 2-wire connection to the diver’s helmet, where the microphone and earphones are connected in parallel.
The tender can use either a headset with boom microphone or the built-in speaker/microphone to...
More
The Sea Water Heater is a built-in system aiming at providing heating to one bell and its divers.
3 Type of Sea Water Heater are available:
SWH 800 litres:
The sea water is heated to a preset temperature in the 800 litre tank by Inconel immersion heating elements
for high corrosive sea...
More