Deep diving equipment manufacturer Singapore

HU2
HU2 is designed to control the relative humidity and the temperature of hyperbaric chambers up to 30 bar.HU2 is designed to meet the most recent standards regarding humidity reduction in chambers. Operating at 50% relative humidity, it can...
More details
Winches
COMANEX designs, manufactures, up-grades or repairs any type of winches dedicated to diving:• Bell winches• HRL winches • Umbilical winches• Open bell winches • Basket winches • Umbilical friction sheaves• Guide...
More details
Bell & Chamber Heater
The SDC/DDC heater is designed for two purposes: • Diving bell: supplied with hot water, the unit is able to maintain the temperature in bells up to 6 m3. • Decompression chambers: the unit may be supplied with hot or chilled water...
More details
O2 Injection Module
Oxygen concentration is displayed, through the hyperbaric sensor, on the controller. The required oxygen level is set from the front panel.If the oxygen concentration detected by the sensor is below the control set point value, the controller will...
More details
Bell Lifting Wire Release Socket
COMEX standard releasable sockets are designed and approved for lifting cables from diameter 22mm to 42 mm. It is operated from inside the diving bell using a spanner or a dedicated wheel. The standard socket features a hooking piece (A) with an...
More details
EV100 Oxygen Solenoid Valve
This valve is designed to be fitted in an oxygen automatic addition system• Brass & steel body• O2 max. pressure: 100 bar• Seat: PCTFE• Cleanliness: O2 usePower supply: 24VDC
More details

Comanex is a company expert in the manufacturering of saturation diving systems in Singapore.

Our company designs and manufactures a great range of systems such as DDC medical and equipment locks, air chambers with integrated control panels, CO2 scrubbers and emergency heaters...

Browse our website to discover all our diving equipment for sale in Singapore: control products, hyperbaric chamber accessories, life support systems (LSS). For any further information, contact our company using our contact form.