Our services
• Brass body• Working pressure: 70 bar• Seat: PTFE for heliox use• Available in stainless steel• Same repair kit for Ø 1/4”, 3/8”, 1/2” valves• Cleanliness: O2 cleanedAvailable also in...
More details
This Freeflow breathing Mask enables a patient to inhale a gas different from that constituting the atmosphere.
It has been specially designed for the breathing of oxygen-rich mix used in Hyperbaric Oxygen Therapy.The Freeflow breathing mask is...
More details
The system supplies decompression chambers with hot water and cold water.
2 storage tanks of 200 litres each are pressurized a few bars above the chamber pressure through pilot operated pressure reducers.
The valves inside the chambers are...
More details
This compact stainless steel unit is specially designed for HRL.
Principle:
The heating or cooling water produced by either the chilled water unit or the electric boiler is sent to the chamber exchanger through the pump according to the setting...
More details
The CxRU is made to regenerate the atmosphere of decompression chamber up to 45 bar.
This system, which can be delivered complete in container, ensures CO2 scrubbing, maintains the desired degree of humidity and regulates the temperature as well...
More details
• Stainless steel black painted body• Class 0.25• Chromium plated ring• Back entry: 1/2” BSP Male• Cleanliness: O2 use• Double graduation msw/fsw
More details
• Stainless steel body• Class 1• Gas pressure entry by stainless steel grid• Cleanliness: O2 use• Use: internal depth monitoring inside hyperbaric vessel• Double graduation msw/fsw
More details
• Stainless steel Body• Class 1• Back entry 1/2’’ BSP male• Double graduation msw/fsw• Cleanliness: O2 use
More details
• Stainless steel• Class 1• Back entry: 1/4” BSP • Oil filable
More details
• Stainless steel body• Class 0.25• Back entry: 1/2” BSP male• Cleanliness: O2 use
More details
Heavy duty Pressure Gauge used in harsh environments including immersion in sea water down to 450 msw.Isolated from ambient pressure to measure the gas reserve pressure regardless the depth.Characteristics:• dia. 63mm• Class 1•...
More details
• Stainless steel body• Working pressure: 400 bar• Stainless steel ball• Seat: devlon for heliox use• Cleanliness: O2 cleaned
More details
• Brass body• Working pressure: 250 bar• Seat: PTFE or copper for O2• Cleanliness: O2 use
More details
Designed to be fitted in COMEX standard diameter 220 mm flanges, but other dimensions and working pressures are available on request. Certified according to ASME PVHO-1. The complete assembly is made of: • Acrylic Conical Frustum window with...
More details
The COMANEX two-channel chamber communication set is a simplex communication set for use with twin lock chambers.
The system consists of a master station fi tted outside the chamber and a speaker/microphone fi tted in each lock. The units are...
More details
This unit is a 2-channel simplex diver communication set. It is designed to operate with a 2-wire connection to the diver’s helmet, where the microphone and earphones are connected in parallel.
The tender can use either a headset with boom...
More details
This diver held TV camera enables the surface to control at any time the dive as it is seen by the diver and to:- give technical instructions and assistance to the diver for more efficient work,- improve communication between diver and surface as...
More details
• Brass body• Working pressure: 250 bar• Seat: PTFE• Same spare parts for both 1/2’’ & 3/8’’ valves• Cleanliness: O2 use
2.5.0.0
2.5.0.0
2.5.0.0
More details
The system supplies decompression chambers with fresh water at desired temperature. The water is pressurized by pumps, avoiding pressurized storage tanks. The desired temperature is set by the LST from the remote control panel situated in the...
More details
The oil burner heats a closed fresh water primary circuit that heats the sea water through an exchanger.
Downstream the exchanger, the delivery temperature is regulated by a 3-way valve mixing the hot and the cold water for a better...
More details
The ESU meets the most recent standards in terms of Construction rules and Operational recommendations.
The ESU controls:
• Temperature
• Hygrometry
• CO2 content of living chambers
The gas is extracted from the chamber and...
More details
The SDC/DDC heater is designed for two purposes:
• Diving bell: supplied with hot water, the unit is able to maintain the temperature in bells up to 6 m3.
• Decompression chambers: the unit may be supplied with hot or chilled water...
More details
The CO2 scrubber is designed to eliminate the carbon dioxyde produced by the occupants of an enclosed area.
Depending on the volume of the chamber and the available space, two types of CO2 scrubber are available.
CO2 Scrubber single basket ref....
More details
Twin hot and chilled water generator, each system independent, one for normal use, one for emergency.
Hot water production: 6 to 30 kW
Chilled water: 4 to 24 kW
Tailor made units, specially designed as diving system integrated modules.
Confi...
More details
HU3 is designed to control the relative humidity and the temperature of hyperbaric chambers up to 30 bar.
HU3 is designed to meet the most recent standards regarding humidity reduction in chambers.
Operating at 50% relative humidity, it can...
More details