Our services
The Bell penetrator is made of one carbon steel penetrator to be welded on the diving bell hull.
Then the bronze bushing can be screwed into the penetrator.
The bushing features 1/4"NPT, 1/2"NPT or 1"NPT hole each side to connect skin...
More details
The system is made to maintain bell and chamber doors closed.• No ‘‘hot work’’ requested for installation• The U part is screwed on the chamber mating face• The pin is screwed on the doorAs to meet the last...
More details
The DDC Heater is designed to provide a continuous flow of hot water to the decompression chamber exchangers.
The purpose of the DDC Heater is to:
- Heat the water during start-up.
- Maintain water temperature during operations.
- Supply the...
More details
The temperature and relative humidity into each chamber are automatically controlled from the saturation control room. The regulation rack uses the signals given by the sensors to adjust the flow of regulation valves.The blowing temperature is...
More details
Oxygen concentration is displayed, through the hyperbaric sensor, on the controller. The required oxygen level is set from the front panel.If the oxygen concentration detected by the sensor is below the control set point value, the controller will...
More details
The old generation of O2% and ppO2 Analysers is no longer available.Please refer to the NEW RANGE Touch Screen Analysers.
More details
2 types of portable O2 Analyser are available: the O2% Monitor and the Hyperbaric O2 MonitorPortable O2 Monitor:• Used to display the oxygen percentage in a gas sample• Sample flow through adaptor (optional)Hyperbaric O2 Monitor:•...
More details
COMANEX manufactures and supplies a large range of analysis and monitoring instruments including a full range of associated sensors.Instrumentation racks are realised upon customer’s specifi cations.Racks can feature analysis instruments, as...
More details
Piston Unions are manual quick connectors with interlock for breathing gases.• Working pressure: 250 bar• Quick coupling• Auto venting device• Tools prohibitedULTRA SAFE UTILISATION:• Manually operated only: the need for a...
More details
COMANEX designs and manufactures Consoles, Cabinets and Racks to control and monitor the operations of diving systems. Thanks to COMEX operating expertise, COMANEX designs are easy to understand, ensuring maximum safety while operating.Gas...
More details
An underwater light suitable for attaching to a diver’s helmet.
Description
The helmet light features a chrome plated cylindrical housing. It is mounted on the diving helmet by means of an ertalon bracket.
The helmet light features one...
More details
We design, manufacture, up-grade or modifie any type of controls for Handling Systems dedicated to diving systems:• Control consoles• Directional control valves blocs• Joysticks• Bell winch control consoles• Regulation...
More details
We designs and manufactures Hydraulic Power Packs for all types of diving systems. We also up-grades and repairs existing HPP.
We already designed and manufactured:
• Bell handing system HPP
• Saturation Diving Twin Bell system...
More details
COMANEX designs, manufactures, up-grades or repairs any type of winches dedicated to diving:• Bell winches• HRL winches • Umbilical winches• Open bell winches • Basket winches • Umbilical friction sheaves• Guide...
More details
Insulation and buoyancy of the diving bell is made by tiling the hull with HPC blocks.
The mechanical resistance and the sealing of the HPC blocks are obtained by coating one fibreglass skin overall the blocks.
The HPC blocks are rigid...
More details
COMANEX designs, manufactures and provides maintenance for diving handling systems:
• Tilting A-frames
• SDC and open bells
• Translation Trolleys
• Single or twin baskets
Conceptions and realisations are in compliance...
More details
COMANEX designs and manufactures all types of Launch & Recovery Systems for Saturation, Bounce and Air diving.
According to customer specifications and support vessel configuration, either Tilting A-Frames, Translating Trolleys or Moon-Pool...
More details
We supply all spare parts for Sea Water Heater as Mixing valves, Thermostatic sensor, Flow controller, Flow sensor, Heating elements, Filters, Non return valves .....
More details
Stainless steel, brass body or bronze relief valves are available. Setting on request.Precise in your indent:• Bronze, brass or stainless steel body• Inlet / outlet diameter and thread• Setting• Fluid
More details
The Comanex paints are suitable for painting of internal / external of Diving Bells and Chambers.
These paints have been developped for the hyperbaric use.
Various paints are available for application on sand-blasted surfaces as per COMANEX...
More details
• Suitable for:
- DDC Bunk box featuring two 24 V bulbs:
- 4 W for main light
- 2.5 W for secondary light
- SDC emergency light featuring 12 V / 4 W bulbs and power supplied by the emergency battery pack
• Water and impact resistant...
More details
This system designed by COMEX INDUSTRIES wears a DNV approval provided that the bulbs and the bulb holders are of a specific type.
More details
Umbilical dry Junction box.The stainless steel junction box features a transformer, insulation control device and connectors. Several designs are available.
More details
- Rated 600 msw (60 bar)
- Pressure tested at 90 bar
- LED type
- Lightning : 10,000 Lumen
- Lightning angle : 135°
- Casing and bolts : Cupro aluminium & Stainless steel
- Viewport : PMMA
- Including Stainless steel supporting...
More details
The O2 add manifold controls the O2 injection in the diving bell or the HRC by means of one buffer tank.
The interlock between the two valves prevents the O2 storage gas bottle to be in direct communication with the hyperbaric vessel when the...
More details